Thinking about replacing your driveway and wondering how much a resin driveway costs in Wigan in 2026? The first thing to establish is whether your existing base can be reused or whether the driveway needs to be rebuilt.
As a rough guide, CG Paving Company advises budgeting around £150–£190 per m² for a resin driveway in Wigan in 2026. The final price depends on the size of the driveway, the condition of the existing base, access, drainage and your chosen design.
For a 50m² driveway, this gives an illustrative budget of approximately £7,500–£9,500.
These figures are a rough guide, not a fixed quotation. Your written quote will confirm the work included, any additional costs and the total including any applicable VAT.
This guide explains what you are paying for, how installation works and what to check before choosing a resin driveway installer in Wigan.
Resin Driveway Prices in Wigan: A Budgeting Guide
The examples below show how CG Paving Company’s rough £150–£190 per m² guide translates to different driveway sizes. Your own quote will depend on the work required at your property.
A square-metre price is useful for an initial estimate, but it only helps when you know what is included. An overlay and a complete replacement are different jobs, so your quotation should explain whether the existing base can be reused or needs rebuilding.
| Driveway Area | Approximate Budget |
|---|---|
| 30m² | £4,500–£5,700 |
| 50m² | £7,500–£9,500 |
| 80m² | £12,000–£15,200 |
| 100m² | £15,000–£19,000 |
These are calculated examples using the guide rate. Your quotation will confirm the specification, any additional work and VAT treatment.
Measure the actual area rather than estimating by the number of cars it holds. Entrance paths, wider turning areas and sections beside the house can all increase the amount of surfacing needed.
Resin Bound or Resin Bonded: What Are You Buying?
Resin bound surfacing uses dried aggregates mixed with resin before the material is spread and trowelled into place. It creates a smooth-looking, textured surface with spaces that allow water through.
Resin bonded surfacing is made by spreading resin onto a base and scattering aggregate over it. It has a different finish and is generally impermeable.
CG Paving Company provides resin bound driveway installation. When comparing quotations, check that each contractor is pricing the same type of system.
What Affects the Cost of a Resin Driveway?
1. The Condition of the Existing Base
A stable, properly prepared tarmac or concrete base may be suitable for an overlay. Loose paving, movement, damaged areas or significant cracking need assessment before any new surface is installed.
Resin surfacing cannot correct an unstable foundation. Covering a problem without dealing with its cause can lead to defects appearing in the new finish.
Individual blocks or paving slabs are generally unsuitable for a direct overlay because movement and joints beneath the resin can cause cracking.
2. Removal, Excavation and the New Base
If the existing driveway cannot be reused, the work may include removing the old surface, taking waste away and constructing a new foundation and base suitable for vehicles.
The amount of excavation, access for machinery and disposal requirements affect the price. A photograph can help explain your plans, but a site assessment is needed to establish the work below the finished surface.
3. Drainage and Finished Levels
Water must have somewhere suitable to go. The installation needs to account for the ground, gradients, garage threshold, entrance steps and adjoining surfaces.
A permeable resin layer over impermeable concrete does not create a fully permeable driveway. Additional drainage may be required, so the quotation should explain the complete drainage arrangement.
4. Edging, Borders and Entrance Details
A simple layout with one aggregate blend is different from a design with contrasting borders, curves or a feature step. These details can add materials and installation time.
Existing inspection covers also need consideration. Ask how access will be retained and whether replacement recessed covers are included.
5. Resin Quality and the Specified Depth
Ask which resin system is being used and whether it is UV stable. UV stable resin helps reduce the colour changes associated with sunlight, which is particularly relevant when choosing lighter aggregate blends.
The surface depth and mixture must follow the chosen manufacturer’s requirements for vehicle use. Compare the specification as well as the headline price.
What Should Your Resin Driveway Quotation Include?
A useful quotation should make the scope clear enough for you to compare it with another contractor’s proposal. Check for:
- The measured area and agreed driveway layout.
- Removal of the old surface and disposal of waste, where required.
- Any repairs, excavation and new foundation or base work.
- The drainage arrangements and changes to levels.
- The resin system, aggregate blend and installation depth.
- Edging, borders, steps and inspection-cover details.
- The total price, including any applicable VAT.
- Payment terms, expected programme and written guarantee terms.
If a quote is lower, ask what explains the difference. Reusing a suitable base can reduce the scope substantially, while an omitted drainage allowance or different specification can make two apparently similar prices difficult to compare.
How Is a Resin Bound Driveway Installed?
Site Assessment and Design
The area is measured and the existing surface, access, levels and drainage are assessed. This is the time to discuss parking space, door access, colours and any changes to the entrance.
Preparation and Groundworks
Depending on the condition of the driveway, the work involves preparing a suitable existing base or removing the old surface and constructing a new one. Required drainage and edging are incorporated into the design.
The base must be stable, clean and suitably dry before resin is applied. Newly installed bases may also require a curing or waiting period.
Mixing and Laying the Resin Surface
The resin and dried aggregates are mixed to the manufacturer’s specification. The mixture is spread and trowelled to the required depth, with care taken around borders, covers and edges.
Weather matters at this stage. Rain, surface moisture and unsuitable temperatures can affect the installation, so the programme may need adjusting.
Curing and Handover
The completed surface needs time to cure before it is used. Your installer should explain when you can walk on it, park on it and how to care for it.
How Long Does Resin Driveway Installation Take?
The programme depends on the groundwork and base system, rather than just the time spent laying the final surface. An overlay has fewer stages than a complete replacement, while drainage changes and entrance work add to the job.
Allow for any new base to become ready for surfacing, suitable installation weather and the final resin curing period.
As an example, Vuba’s aftercare guidance advises allowing 24–48 hours before walking on its surface and 48–72 hours before driving on it. These timings are product- and weather-dependent. Follow the instructions for the system actually installed.
Do You Need Planning Permission for a Resin Driveway in Wigan?
For houses in England with the relevant permitted development rights, a new or replacement front driveway can normally be installed without planning permission if it is permeable or directs rainwater to a suitable lawn or border to drain naturally.
Planning permission is generally needed where more than 5m² is covered with an impermeable surface without provision for water to drain to a permeable area.
The complete driveway construction matters. Resin bound surfacing alone does not establish that these requirements have been met. Restrictions can also apply to the property or proposed work.
Read the Planning Portal guidance on paving front gardens and check the position for your property if needed.
A new or extended dropped kerb is a separate consideration. Wigan Council requires an application, and vehicle crossings on classified roads require planning permission before that application proceeds. See Wigan Council’s dropped-kerb guidance before budgeting for a new vehicle entrance.
See Completed Resin Driveways in the Wigan Area
Real installations can help you decide which design features matter to you.
Our resin driveway project in Hindley Green features a Manhattan resin blend, a contrasting Oyster Pearl border and a bespoke entrance step.
You can also view our resin driveway and garden transformation in Standish, where the new frontage formed part of a wider landscaping project.
These examples show the design possibilities. Your own quotation will depend on your driveway’s area, condition and agreed specification.
Looking After Your New Resin Driveway
Resin bound driveways need occasional maintenance to keep them looking good and draining effectively: Read our previous guide How to Maintain Your Resin Bound Driveway All Year Round.
- Sweep away leaves, soil and other debris.
- Deal with spills promptly using the recommended cleaning method.
- Follow the supplier's guidance for washing and any cleaning products.
- Avoid dragging sharp or heavy objects across the surface.
- Ask for advice before placing a skip or an unusually heavy load on the driveway.
Regular care and a suitable foundation support long-term performance. Check the scope of any product and installation guarantees rather than assuming every resin driveway has the same lifespan or cover.
Resin Driveway Cost FAQs
How Much Would a 50m² Resin Driveway Cost?
Can Resin Be Laid Over an Existing Driveway?
Sometimes. A structurally sound, suitably prepared tarmac or concrete base may be usable, subject to an assessment of its condition, levels and drainage. Loose blocks or slabs are generally unsuitable for a direct overlay.
Is Resin Cheaper Than Block Paving?
There is no single answer for every property. Compare quotations for the same area, groundwork and drainage requirements. The surface choice is only one part of the total project.
Does a Resin Driveway Add Value to Your Home?
A well-designed driveway can improve the appearance and usability of your frontage. Any effect on sale value depends on the property and local market, so a particular financial return cannot be guaranteed.
Can a Resin Driveway Be Installed in Winter?
Installation depends on the product’s temperature and moisture requirements and a suitable weather window. Your installer should confirm whether conditions are appropriate and explain any changes to the programme.
Get a Resin Driveway Quote in Wigan
The most useful next step is to establish whether your existing driveway can be reused and what your preferred design involves.
CG Paving Company designs and installs resin bound driveways, with completed projects in Wigan, Hindley Green and Standish. We can discuss the layout, finishes and technical requirements for your property.
Call 0800 774 7981 or contact CG Paving Company to discuss your new resin driveway and request a quotation.
